Solar Panel & Roofing Services in Round Rock

Project Highlights:

• The Backbone: We used galvanized metal posts driven deep for maximum stability. Unlike wood posts, these will never rot, snap in high winds, or sag over time.

• The Materials: We chose Premium Cedar for both the pickets and the rails. Cedar is naturally resistant to rot and insects, and its stability means less warping and twisting.

• The Finishing Touch: We applied a professional-grade stain to seal the wood immediately. This locks in the cedar's natural beauty and protects it from graying under the Texas sun.

To fix this properly, we didn't just tweak the gate; we completely re-engineered the solution.

1. Changing the Direction (The Game-Changer): The single biggest improvement was our decision to reverse the swing. Instead of trying to force the gate uphill, we made the doors swing inward, following the natural downhill grade of the slope. This allowed us to build the gate tight to the ground for security and aesthetics while still allowing full functionality.

2. Structural Overhaul: We upgraded the entire infrastructure of this section. We removed the old supports and set heavy-duty metal posts in deep concrete footings. Metal posts are critical for wide double gates as they prevent the hinges from sagging over time.

3. Material Upgrade: We replaced the old infrastructure with all-new cedar rails and pickets and applied a beautiful, weather-resistant stain. This provides a striking, high-end look that complements the customer’s stone exterior much better than the weathered lumber it replaced.

The Process:

1. Deep Clean: We started with a professional wash to strip away years of oxidation, dirt, and mildew.

2. Meticulous Prep: Proper staining requires a clean, dry surface to ensure the wood actually absorbs the product for long-lasting protection.

3. Premium Stain Application: We applied a high-quality wood stain that not only looks incredible but protects the fence against UV rays and moisture.

The Result:

A fence that looks brand new for a fraction of the cost of replacement. We completed this entire project—prep to finish—for under $750.

There's a fine line that makes a whole difference.

Gift your home that new fence upgrade it deserves. That new stain and water seal to protect your cedar from rotting or cracking.

Give Frank a call for a FREE fence quote! 📞

Thinking about a new fence? It gives you peace of mind, adds security, and makes your home look fresh and inviting.

Call Frank for a free quote at 737-259-6766 and give your property a boost today!

Looking for a fence built to last? We estimate just $250 per metal post and $45 per linear foot—using 3 cedar rails and all cedar wood for long-lasting peace of mind. call us 737-259-6766

Mrs. Bellisima had lost several shingles during the latest round of high winds. She did have an outrageous deductible and needed her roof repaired ASAP.

For our $500 minimum repair charge, we were able to:

• Inspect the surrounding area for hidden damage.

• Install fresh matching shingles.

• Restore the roof’s integrity and curb appeal.

36-Hour Turnaround: Custom Backyard Partition

Sometimes you don't just need a fence; you need it now. We received a call from a homeowner who needed to add a 12-foot section to divide their backyard.

The Challenge: The customer had a tight budget and an urgent need for the addition. While our "gold standard" is typically Cedar due to its higher quality and longevity, we were happy to provide a high-quality Pine alternative to meet their specific price point.

The Result: We were on-site the very next day. At our company, we pride ourselves on a quick response; most of our jobs are completed within 48 hours.

We got a call from a homeowner whose puppy was making a break for it through the front gate. After taking a look, we found three main culprits:

• The Gap: A 6-inch opening at the bottom that was essentially a doggy door.

• The Damage: Broken pickets that left the gate insecure.

• The Lean: A gate that had shifted out of alignment over time.

The Fix: Instead of a costly replacement, we gave this gate a precision tune-up. We dropped the gate to close that 6-inch gap, replaced the broken pickets, and realigned everything so it swings perfectly again.

Not all fences need to be replaced! Sometimes, all you need is a professional touch to make it safe and functional again.

Out with the old, weathered wood and in with this stunning backyard transformation! 🌳 We completely upgraded this property line with a custom-built fence designed for both serious durability and major curb appeal.

Here is what went into this build:

• 100% All-Cedar Construction: Naturally resistant to rot and insects.

• Heavy-Duty Pickets: Upgraded 1" thick cedar pickets for maximum privacy and strength.

• Built to Last: Solid cedar rails backed by sturdy metal posts so it won't lean or warp.

• Premium Finish: Sealed with a rich, oil-based stain to protect the wood and make that gorgeous natural color pop.

Savings at the Gate: A Quick Fix for a Falling Fence

We recently got a call from a homeowner in a bit of a jam. His gate hinge had completely separated, the gate was sagging toward the ground, and three pickets had snapped in the process. It wasn’t just an eyesore; it was a security issue.The Repair Breakdown

We didn't need to rebuild the whole thing to get it working like new. Here’s how we handled it:

• Structural Support: Replaced the damaged rail to ensure the frame was solid.

• Aesthetic Fix: Swapped out the 3 broken pickets to match the rest of the fence.

• Hardware Reset: Re-secured the hinge to get the gate swinging smoothly again.

The Result

For our minimum service fee of just $79.95, this customer went from a failing gate to a functional one.

The "Spot Paint" Disaster: Restoring a 2,700 Sq. Ft. Home

We recently received a call from a homeowner facing a common but frustrating property management nightmare. Her outgoing tenant had attempted to "touch up" the walls before moving out.

The Problem: Mismatched "Spot Painting"

As you can see in the before photo, the walls were covered in mismatched paint patches. While the tenant likely had good intentions, using the wrong sheen or a slightly different color match turned the entire house into a checkered mess. This wasn't just a few spots; the entire 2,700+ sq. ft. home was covered in these visible "band-aids."

Our Solution: A Total Wall Reset

When "spot painting" goes this far, the only way to achieve a professional, seamless finish is a full repaint. Our team stepped in to:

• Evaluate the Surface: Ensure all previous "patches" were sanded and primed where necessary.

• Full Wall Coverage: We repainted the walls throughout the entire home to ensure color consistency and a flawless finish.

• Efficiency at Scale: Despite the large footprint of the home, we worked quickly to get the property back on the market.

The Result: Professional Quality at a Fair Price

We transformed this home from a patchy DIY project back into a pristine, move-in-ready space. For this 2,700+ sq. ft. project, we were able to repaint all the walls for under $4,700.

Pro Tip for Homeowners: Never rely on "spot painting" for large areas. Different paint batches and ages will almost always show a "flashing" effect. If you want it done right the first time, give us a call!